Naaien-Breien | hobbyblog.nl

Archief | naaien-breien

11790 Koker van vilt voor brillen en mobiele telefoons

Geschreven: 14 januari 2017 door admin

Naaien met vilt en naaldvilten

Het vilt wordt geknipt en aan elkaar genaaid met mercerised katoen garen om kleine kokers te maken. De decoratie wordt danwel genaaldvilt of uit vilt geknipt die op de koker genaaid of gelijmd kan worden met textiellijm.

Afhankelijk van je kunnen, kunnen deze kokers worden gedecoreerd met vele kleine details en ontwerpen. De delen worden aan elkaar genaaid met feston- of stiksteken.

Je kan naaldvilten combineren met uitgeknipte delen van vilt … knopen, kralen, kant en andere grappige details. Laat je fantasie de vrije loop. Er is geen sjabloon voor deze kokers, omdat brillen en mobiele telefoons in diverse maten te verkrijgen zijn.

1

Needle felting. Place some wool on top of a square piece of felt and felt using the felting needle – up and down. Don’t forget your needle felting foam pad.

2

A piece of felt. Cut designs from felt and glue them onto a square piece of felt using textile glue.

3

Sew the sides and – if you wish – the decoration using mercerised cotton yarn. Choose either tacking stitches or buttonhole stitches.

Reacties uitgeschakeld voor 11790 Koker van vilt voor brillen en mobiele telefoons

11988 Engel in Vivi Gade Design stof

Geschreven: 14 januari 2017 door admin

Skagen engel

Gemaakt van Vivi Gade Skagen Design stof. Opgevuld met polyester vulsel en gedecoreerd met kant, knopen en katoengaren als haar. Vleugels van veren zijn erop gelijmd.

1.

Cut out the fabric parts using the template.

2.

Sew the legs together, turn them inside out and fill lightly with polyester stuffing.

3.

Sew the body parts together, front side against front side with the legs in between as shown. Turn inside out and fill with polyester stuffing.

4.

Sew the arms and hands together. Sew the whole of the arm together – make sure to leave a 3cm hole for turning the arm inside out.

5.

Fill the arms with stuffing and sew the hole together.

6.

Sew the head onto the body.

7.

Sew a lace border onto the edge of the dress and as a collar.

8.

Sew the arms onto the body using buttons.

9.

Glue on cotton yarn as hair. Glue on wings.

10.

Twist silver thread to make a halo which is then glued on.

Aangehecht bestand File icon Patroon (259 kB)

Reacties uitgeschakeld voor 11988 Engel in Vivi Gade Design stof

12147 Knuffel speelgoed

Geschreven: 14 januari 2017 door admin

Zacht knuffelspeelgoed

Grappige sokpoppen – zeer knuffelbaar. De ogen en de oren zijn gemaakt van Silk Clay wat opgenaaid is. Het haar en de manen zijn gemaakt van acrylgaren en de sok is gevuld met polyester vulling.

A Sure Hit

These cuddly toys are easy for school children to make. These socks in beautiful colours and patterns become all sorts of cuddly toys. Beside the materials shown, many other ways of decorating the sock puppets can be added. The result is only limited by your imagination. Children aged 8 and older can manage most of the tasks themselves. Enjoy.

1

Fill the sock with polyester wadding and tie a knot at the end. Cut notches for the “tail”.

2

Now shape the cuddly toy with a darning needle threaded with acrylic yarn.

3

Sew or glue the eyes, snout and teeth onto the sock.

4

Wrap yarn for hair around your hand and sew the hair onto the sock using a darning needle threaded with acrylic yarn.

More Variants

Reacties uitgeschakeld voor 12147 Knuffel speelgoed

1125 Transfer Designs op T-Shirts

Geschreven: 14 januari 2017 door admin

Call Me

We hebben de afbeelding van de oranje telefoon op internet gevonden, deze afgedrukt op Transfer Paper geprint en vervolgens op het T-shirt gestreken.

1

Choose a design and print it onto Transfer Paper (use an Ink Jet printer).

2

Cut out the design to your desired shape (you may draw the outline with a pencil first…).

3

Separate the backing paper from the transfer.

4

Place the design on the t-shirt and iron it onto the t-shirt. Put a piece of grease proof paper between the design and the iron. (Turn the iron dial onto “cotton” – fix the print by pressing moving the iron firmly for approx. 1 minute). Let the print cool for a few minutes. Then remove the grease proof paper.

5

Finally decorate with stamp printing using Textil Solid fabric paint.

Tips

Instructions are included with the transfer paper in case of any doubt.
Find cool designs on your computer or take your own pictures and print them out.
This is a super activity for slightly older children who want to create their very own cool t-shirt.

Reacties uitgeschakeld voor 1125 Transfer Designs op T-Shirts

11142 Schaatsen van vilt om op te hangen

Geschreven: 14 januari 2017 door admin

Vivi Gade vilt

Rustieke kerstdecoraties gemaakt van ons eigen vilt van Vivi Gade Design. Teken het patroon m.b.v. het sjabloon, knip uit het vilt en naai aan elkaar met vulsel ertussen.

1

Draw the pattern from the stencil No. 28-205. Add half a centimetre for the seam on the boot and extra height on the skating part.

2

Sew the boots, insides together, using buttonhole stitches. Use normal backstitches when sewing on the skating parts. Remember to leave a hole for the filling.

3

Fill the doll filling in the boot and finish sewing. Decorate with flax twine and wood buttons.

Reacties uitgeschakeld voor 11142 Schaatsen van vilt om op te hangen

12225 Kippen met een rand

Geschreven: 14 januari 2017 door admin

Moeder kip met haar kuikens

Deze koddige kippen zijn genaaid van Vivi Gade vilt en gevuld met polyester vulsel en op een metalen staander bevestigd.

1.

Cut a piece of felt. For the chicken 10 x 20cm and for the hen 20 x 40cm. Then cut two beaks, two cock’s combs and two wings in some of the other colours of felt.

2.

Glue the two combs together with double-sided foil tape. Do the same with the beak and wings.

3.

Fold the large piece of felt right side against right side and sew together at the sides. Remember to place the comb against the fold. Also sew together half of the bottom.

4.

Turn the felt piece inside out and fill it with polyester stuffing.

5.

Sew the opening at the bottom together by hand.

6.

Sew wooden beads on for eyes.

7.

Make a small hole at the in the bottom of the chicken with at pair of scissors.

8.

Glue one end of the metal bar into the hole of the chicken and attach the metal stand to the other end of the metal bar.

Aangehecht bestand File icon Patroon (280 kB)

Reacties uitgeschakeld voor 12225 Kippen met een rand

11393 Beenwarmers en ronde sjaal

Geschreven: 14 januari 2017 door admin

Gebreid op een knitting loom

Beenwarmers en ronde sjaal gebreid op een knitting loom met Barcelona garen. De prachtige bloemen zijn gemaakt op een Knit-Wit loom voor ronde rozettes met Melbourne garen.

Instructions are included in the knitting loom and Knit-Wit loom.

Leg warmers: 30cm
Wool requirements: 4 balls of yarn

Neck gaiter: 45cm
Wool requirements: 6 balls of yarn.

1

Make stitches by bringing the wool around the pegs from behind, around the whole of the knitting loom, twice round.

2

Lift the lower row over the upper row and off the pegs. Continue until you have reached the desired length.

3

Cast off by knitting as described in step 2.

4

Lift the knitted stitch off and put it onto the peg to the left.

5

Knit the stitch and lift it back …

6

to the peg on the right.

Reacties uitgeschakeld voor 11393 Beenwarmers en ronde sjaal

11683 Trendy tas genaaid van vilt

Geschreven: 14 januari 2017 door admin

Genaaid van vilt

Tas genaaid met katoengaren en vilt. Met gespsluitingen van imitatieleer en metaal.

It makes the sewing easier and it looks a lot nicer if you measure up for the stitches. Use the fine black marker pen for marking all the cut-out parts. Put the first mark ½cm from the edge (seam allowance). From the mark, measure 1cm between each stitch. This results in a lovely and even result. Sew with buttonhole stitches.

1.

Use a fine black marker pen when drawing the templates onto the felt.

Aangehecht bestand File icon Mønsterark (729 kB)

2.

Cut out the parts.

3.

Mark on the felt where to sew the stitches:
Picture 3A and 3B: this is how to sew buttonhole stitches.
Picture 3C: Secure the cotton yarn.

3A.

3B.

3C.

4.

Fasten the pocket temporarily to prevent it from sliding when sewing. Remove the threads afterwards.

5.

Sew on the side parts. Start with the edge at the top.

6.

The side parts are now sewn on.

7.

Remove the temporary stitches from the pocket.

8.

Sew on the pocket in the base. Only sew through the top layer of the felt so the sewing is not visible from the front.

9.

Fold over the end and sew the other side. Start from the top.

10.

Pictures 10-19: Sew on the black belt pieces with metal buckles to make the strap.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Pictures 20-24: Sew the buckle belt strap.

21.

22.

23.

24.

25.

Pictures 25-26: Attach the buckle belt strap to the bag. Secure the end with the buckle so it does not move whilst sewing.

26.

27.

Sew the buckle belt strap onto the bag, starting from underneath.

28.

Close the bag. Put the buckle belt strap around the middle of the bag. Hold it firmly in place with a needle.

29.

Pictures 29-31: Open the bag and sew on the buckle belt strap. Tie the yarn on the inside of the bag and tie on the My Design pendant.

30.

31.

Reacties uitgeschakeld voor 11683 Trendy tas genaaid van vilt

12231 Eierwarmers van vilt

Geschreven: 14 januari 2017 door admin

Hou de eieren warm

Eierwarmers van Vivi Gade vilt. Het vilt is aan elkaar genaaid met festonsteken. Gedecoreerd met vlas koord en kant. De moeder kip is decoratie.

1.

Cut out the parts from felt using the template.

2.

Sew the part together with buttonhole stitches. Start at the bottom and stop 3cm from the top.

3.

Double over four pieces of flax twine and gather them with a piece of mercerised cotton yarn. Bend down the top of the felt cone, insert the comb and sew the remaining 3cm to the top.

4.

Cut out the beak from felt, fold and sew with a couple of stitches at the back. Glue the beak onto the hen.

5.

Glue the lace around the bottom edge of the hen.

6.

Glue a piece of flax twine on top of the lace border with very small blobs of blue. Tie a bow.

7.

Make eyes with black Plus Color in a refill plastic bottle with a tip.

Aangehecht bestand File icon Patroon (273 kB)

Reacties uitgeschakeld voor 12231 Eierwarmers van vilt

11255 Poncho gemaakt op een Butterfly Loom

Geschreven: 14 januari 2017 door admin

Voor frisse avonden

Een prachtige poncho gemaakt op de Butterfly Loom. Het garen wordt om de loom gewonden en aan elkaar gemaakt met knopen. Tot slot worden alle vierkanten aan elkaar gehaakt of genaaid om een poncho te maken.

Wool requirements: 6 balls of Soft Mohair. The loom comes with a CD and a user manual.

1

Take 2 balls of yarn and secure the ends onto the loom. Wrap a total of 5 rounds for each square.

2

Sew all the yarn intersections together.

3

When all yarn intersections are sewn together, remove from the square from the loom. You will need 64 squares for a large size poncho.

4

Remove the square from the loom by opening it on the back side.

5

Fold the loom and remove the square.

6

Start by putting two squares together with the front sides facing each other and and insert a crochet hook into the first corner loops. Pull the loops from the square at the back through the loops of the square on top. Now crochet the next loop as well. Continue through the next loops – crochet all the squares together with chain stitches – made through the loops that are at the edge of the square. Secure by tying a knot. See the pattern instructions how to crochet the squares together to form the front and the back. Finally crochet the shoulder seam.

7

For the neck cord use 16 pieces of string each measuring 4 meters. Twist the yarn and double over. Tie the end. For the tassels wind 30 times around your finges with two pieces of string. Make two tassels. Tie the strings securely 1/3 from the top and cut through at the bottom. Tie a tassel onto each end of the cord for the neck.