Archief | creativ-cadeaus

12979 Plastic eieren met servetten decoupage

Geschreven: 12 januari 2017 door admin

Servetten decoupage op plastic eieren

Deze plastic eieren zijn geverfd met Plus Color verf en gedecoreerd  met servetten en veren.

1.

Verf het ei met Plus Color verf.

2.

Breng met decoupagelak kleine stukjes servet op het ei aan. NB! Breng meerdere lagen decoupage lak aan voor een glanzend oppervlak.

3.

Lijm een veer in een houten kraal.

4.

Knip het overtollige deel van de veer af.

5.

Lijm de kraal met veer op het ei.

6.

Bevestig een metalen hanger aan het ronde deel van het ei.

Reacties uitgeschakeld voor 12979 Plastic eieren met servetten decoupage

12405 Crackling met servetten

Geschreven: 12 januari 2017 door admin

Transparante Facetten-Lack

Bevestig het servet op het ikoon met decoupage lijmlak. Breng daaroverheen een laag transparante Facetten-Lack aan met een spatel. Inka Gold creamy metaalkleurige glanzende was is in de crackels gewreven.

1.

Beschilder het ikoon met witte Plus Color verf.

2.

Knip het figuurtje uit het servet en bevestig op het ikoon met decoupagelak.

3.

Breng een ruime 2-4mm laag van de crackle lak transparante Facetten-Lack aan, met behulp van een spatel. Het crackling proces begint na een paar uur.

4.

Wrijf Inka Gold creamy metal gloss was in de crackling groeven met een ronddraaiende beweging.

5.

Wrijf het overtollige Inka Gold met een vochtige doek weg. De was moet alleen in crackling groeven zitten.

Reacties uitgeschakeld voor 12405 Crackling met servetten

13076 Een thermometer huis versierd met masking tape

Geschreven: 12 januari 2017 door admin

Een gedecoreerd thermometer huis

Dit houten huisje met thermometer is geverfd met witte Plus Color verf en vervolgens gedecoreerd met Vivi Gade Design masking tape.

1.

Paint the wooden thermometer house with white Plus Color Craft paint.

2.

Attach masking tape along the roof of the thermometer house. Make an effort to make the squares more or less fit together, allowing the same pattern to be seen on both sides from the center. You may let the masking tape overlap.

3.

Cut off the excess masking tape. Also cut off the overlapping masking tape from the roof pit and down.

4.

Decorate the rest of the front of the house with masking tape in your chosen design. Remove the excess masking tape precisely using the edges of the house as the template.

5.

Attach rows of masking tape onto a piece of white card. Make the squares fit together on a square big enough to fit the outline of the bird available as a separate template for this idea.

Now place the bird template on the piece of white card with the masking tape attached and cut through both layers.

6.

Attach the bird onto the thermometer house using 3D foam pads.

7.

Insert a piece of string for hanging though the hole at the top of the house.

Reacties uitgeschakeld voor 13076 Een thermometer huis versierd met masking tape

13066 Geverfde, gestapelde terracotta kandelaars

Geschreven: 12 januari 2017 door admin

Geverfde, gestapelde kandelaars

Deze terracotta kandelaars zijn stapelbaar en kunnen worden gecombineerd op vele verschillende manieren. Elke kandelaar is in een andere kleur geverfd met A-Color glasverf. Glasverf geeft een glanzend, gepolijst oppervlak. Een zwarte glas- en porseleinstift is gebruikt voor het aanbrengen van details. De kandelaars kunnen worden gebruikt als waxinelichten en als conventionele kandelaars!

1.

Paint each candle holder with an individual pattern and colour. Stacking a stripy candle holder and a candle holder with painted dots, adds an amusing effect when stacked.

2.

Paint points with two colours. You may draw guide lines with a pencil onto the candle holder before painting.

3.

Paint the candle holder using a light base colour and then paint dark dots using a foam stencil brush.

4.

Paint a check pattern. Apply a coat of the light base colour paint onto the entire candle and paint checks with the dark paint.

5.

NB! Only paint checks onto three sides of the candle holder and leave the forth side to paint a face. Use a white glass & porcelain marker for drawing the eyes and the mouth and use a black one for adding details and contour lines where two colours are adjacent to each other.

Reacties uitgeschakeld voor 13066 Geverfde, gestapelde terracotta kandelaars

1225 Sleutelhangers en veren met Silk Clay

Geschreven: 12 januari 2017 door admin

Grappige sleutelhangers

Grappige sleutelhangers

1

Knead two colours of Silk Clay into each other with your hands and roll a ball.

2

Shape three small legs for a little octopus.

3

Press the eyes into the head.

4

Press rhinestones onto the legs.

5

Finally press the key ring on top of the head.

6

Pull out some of the spring and press the end onto the top of the head.

7

Pull out some of the spring and wind the string around the sucker, until it is in place.

Tips

Silk Clay is self-hardening and dries quickly. Shape the modelling clay and make details, whilst it is still moist and flexible.

Silk Clay can also be used for making funny bouncing balls, as the modelling clay is very light and with its rubber-like texture when dry, it enables it to bounce.

Reacties uitgeschakeld voor 1225 Sleutelhangers en veren met Silk Clay

11719 Sprankelende glas- en porseleinstiften ook voor zwarte mokken

Geschreven: 12 januari 2017 door admin

Glas- en porseleinstiften met enorme dekkracht

De zwarte mokken zijn gedecoreerd met een sprankelende glas- en porseleinstift die zowel op lichte als op donkere artikelen dekt. Bak na droging de mok af in een huishoudoven op 160°C gedurende 45 minuten.

Reacties uitgeschakeld voor 11719 Sprankelende glas- en porseleinstiften ook voor zwarte mokken

10133 Onderzetters

Geschreven: 12 januari 2017 door admin

Onderzetter gedecoreerd met Glas- en Porselein stiften

Een porseleinen tegel gedecoreerd met glas- en porselein stiften. Na droging wordt de tegel afgebakken in een gewone huishoudoven op 160°C gedurende 40 minuten. De tegel wordt gelijmd in de lijst met een lijm pistool.

1.

Clean or wash the tiles with spirit before you draw or paint on them. In this example we have firstly drawn a design with black and then filled it in. When filling in the design, you may occasionally have to press the tip down onto the tile to get more paint out.

2.

When the paint is completely dry, fix the tile in the oven at 160°C for 40 minutes. Now you can wash it by hand.

Reacties uitgeschakeld voor 10133 Onderzetters

12010 Beeld met gipsgaas

Geschreven: 12 januari 2017 door admin

Geinspireerd door Picasso

We hebben interessante beelden gemaakt door een geraamte gemaakt van zwart bonsai draad met gipsgaas te bedekken. Verf met A-Color acrylverf in neon kleuren en gebruik Poster Hobby Markers voor de details.

The wooden icon plates are used as stands. They are painted with black Plus Color and a hole has been drilled into it for inserting the bonsai wire. This project is suitable for school Art lessons but making the small figures can also be a fun activity for preschool children. We have been inspired by Picasso … what will inspire you?

1

Form a shape from bonsai wire. Make it U-shaped with loops at the end as feet. Cover with gauze bandage and let it dry.

2

A sculpture on a stand: Drill holes in a wooden icon plate.

3

Form a bonsai wire skeleton and push the ends into the predrilled holes of the wooden stand. Dip the gauze bandage in water and cover the skeleton with the gauze bandage. Smooth the surface with your fingers. Let it dry.

4

Paint it with A-Color acrylic neon paint, let it dry and draw details with a Poster Hobby Marker Pen.

Reacties uitgeschakeld voor 12010 Beeld met gipsgaas

12437 Waxinelichtje in bloemvorm met decoupage

Geschreven: 12 januari 2017 door admin

Decoupage op een waxinelichtje

Knip vormen uit goud papier en scheur strozijdepapier in stroken en lijm deze met decoupagelijmlak voor glas op de waxinelichthouder.  A-Color Glass verf is op het glas gedept waar het papier niet dekkend is. Alles is aangebracht aan de onderkant van het glas.

1.

Werk aan de onderkant van de waxinelichthouder. Knip of scheur kleine stukjes strozijdepapier en knip vormen uit het goud papier.

2.

Breng een laag decoupagelaklijm aan op de onderkant van de waxinelichthouder. Decoreer met de stukjes papier. En breng vervolgens nog een laag decoupagelaklijm aan. Laat drogen.

3.

Dep A-Color glasverf op de gehele onderkant van de waxinelichthouder.

Reacties uitgeschakeld voor 12437 Waxinelichtje in bloemvorm met decoupage

12136 Fluoriserende kunst

Geschreven: 12 januari 2017 door admin

Oliepastel op hout

Houten ikoonen geverfd met Plus Color en vervolgens gedecoreerd met oliepastels in neon kleuren. Het design is gekerfd in het oppervlak en daarna is het kunstwerk gevernisd.

1

Paint an icon plate with white and black Plus Color Craft Paint and allow it to dry thoroughly.

2

Draw the design with oil pastels in neon colours – apply generously.

3

Etch the surface with a pointed object.

4

Apply one or two coats of varnish.

Reacties uitgeschakeld voor 12136 Fluoriserende kunst