Geschreven: 22 februari 2017 door admin
Prachtige Paasdecoratie
Deze schattige kleine kippen zijn gemaakt van Vivi Gade Design vilt van de Helsinki serie. De vleugels en de poten zijn gemaakt van bloemendraad en aan het lijfje genaaid. De ogen zijn houten kraaltjes.
1.
Draw the desing onto the felt twice using the template and cut out.
2.
Make the legs, the wings and the comb from floral wire as follows:
For the legs: cut two pieces of floral wire each measuring approx. 80cm.
For the comb: approx. 40cm.
For the wings: two pieces measuring approx. 40cm.
3.
Double over the floral wire to twist the ends together. Follow the same procedure to make the legs, the comb and the wings.
Form the feet and twist the ends together.
4.
Put the felt pieces together (right sides facing out) and sew together with buttonhole stitches all the way around.
When having sewn 7cm along one side, attach the wing between the two pieces of felt and continue sewing.
At the tip insert the comb and continue sewing. Don’t forget the wing at the other side.
5.
Before sewing the base together, insert a small amount of polyester stuffing inside the chicken.
6.
Pull a wooden bead onto the legs and finish at the top by twisting to form a small loop. Sew the legs onto the body with the small loop.
7.
Finally cut out a beak and glue it onto the chicken. Sew wooden beads onto the chicken for eyes.
Geschreven: 22 februari 2017 door admin
Kerstster
Gevouwen van Vivi Gade Design papier. Gedecoreerd met brads, kraalkapjes en decoratief lint. In elkaar gezet met een E-Z dubbelzijdig tape dispenser.
1.
Cut eight pieces of Vivi Gade Design Paper each measuring 10 x 6.5cm.
2.
Fold each piece in half lengthwise.
3.
Fold each corner into the centre.
4.
Fold again as shown so the edges are flush with the middle.
5.
Smooth the edges with a bone folder.
6.
Assemble the short sides and apply adhesive from the E-Z double-sided adhesive dispenser along the edge as shown.
7.
Now take another folded piece of paper, put it next to the one with the adhesive and fold the flap over.
8.
Assemble a bead cap with a brad and attach to the star.
9.
Attach a decorative ribbon for hanging.
10.
Glue the two half stars together.
Geschreven: 22 februari 2017 door admin
Moeder kip met haar kuikens
Deze koddige kippen zijn genaaid van Vivi Gade vilt en gevuld met polyester vulsel en op een metalen staander bevestigd.
1.
Cut a piece of felt. For the chicken 10 x 20cm and for the hen 20 x 40cm. Then cut two beaks, two cock’s combs and two wings in some of the other colours of felt.
2.
Glue the two combs together with double-sided foil tape. Do the same with the beak and wings.
3.
Fold the large piece of felt right side against right side and sew together at the sides. Remember to place the comb against the fold. Also sew together half of the bottom.
4.
Turn the felt piece inside out and fill it with polyester stuffing.
5.
Sew the opening at the bottom together by hand.
6.
Sew wooden beads on for eyes.
7.
Make a small hole at the in the bottom of the chicken with at pair of scissors.
8.
Glue one end of the metal bar into the hole of the chicken and attach the metal stand to the other end of the metal bar.
Geschreven: 22 februari 2017 door admin
Terwijl we wachten
Een advent kalender gemaakt van zelf te vouwen doosjes. De deksels zijn bekleed met Vivi Gade Design cadeaupapier. Gedecoreerd met cijfers van vilt bevestigd aan koord met alligator clips.
1
Using the cut-out template (folding box), draw this onto the design paper and cut it out for the box lid.
2
Fold the lid. Fold the corners as shown in the photo.
4
Fold down the front edge.
5
Fold down the back edge. Then unfold the box lid.
6
Glue the paper from step 1 onto the box lid with a glue stick.
8
Make a hole in the corner of the box lid and insert a piece of doubled-over paper string decorated with wood beads.
9
Fold the base of the box.
10
Decorate the side of the box with glued on felt numbers.
Geschreven: 22 februari 2017 door admin
Kerstkaart
De bomen zijn gevouwen van Vivi Gade Design papier en op een kaart gelijmd met een extra vel, vezelpapier en strasstenen.
1.
Glue a piece of a sheeted pink card onto the card using double-sided tape. Also glue a piece of fibre paper onto the card.
2.
Cut five squares from Vivi Gade Design Paper measuring 5 x 5cm, 6 x 6cm, 7 x 7cm, 8 x 8cm and 9 x 9cm. Fold each piece in half, turn and fold again.
3.
Then fold both diagonals. Smooth with a bone folder.
4.
Fold two sides towards the centre.
5.
Fold the two front ends down as shown.
6.
Start making the Christmas tree by attaching the largest folded square onto the bottom of the card using double-sided tape.
7.
Attach the five parts one by one.
8.
Cut a gold star using the template. Glue this onto a piece of card and cut out the star.
9.
Attach 3D foam pads onto the star.
10.
Attach the star onto the card.
11.
Attach rhinestones in the corners of the card.
.jpg )
Geschreven: 22 februari 2017 door admin
Decoratieve kandelaar
De waxinelichthouder is geverfd met Plus Color acrylverf. De decoratieve rand is geknipt uit een vel Vivi Gade Design papier en op de rand gelijmd met decoupage lijmlak.
1.
Paint the candle holder with off white Plus Color Craft paint.
2.
Lightly sand the candle holder and you may apply another coat of paint.
3.
Cut out a decorative patterned strip of Vivi Gade Design paper from the Copenhagen series.
4.
Glue the strips along the edges of the candle holder using decoupage lacquer.
5.
Paint the tips of the pine cones to be used for decoration.
Geschreven: 22 februari 2017 door admin
Engelen met glitter
Engelen geknipt uit Vivi Gade Design papier en op waxinelichten gelijmd met decoupage lijmlak. De waxinelichten zijn daarna gedecoreerd met Paper Pen en 3D zilverkleurige liner alsook zilverkleurige chenilledraad aan de bovenkant.
1
Cut the selected angels from Vivi Gade Design Paper – the Bremen series.
2
Attach the angel onto the candle holder using decoupage lacquer (glitter) and apply thinly to the entire candle holder.
3
Glue the silver pipe cleaner onto the top edge of the candle holder using a glue gun.
4
Finish by decorating the candle holder with dots made with a Paper Pen.
.jpg )
Geschreven: 22 februari 2017 door admin
Uitgestanste sterren
De uitgestanste sterren zijn aan elkaar gemaakt en op een stuk papierkoord geniet.
1.
Assemble the card and vellum hearts in layers with 3D foam pads. Finish with a wooden button.
2.
Make tassels and tie them onto a piece of string.
3.
Glue on the string with the tassels between the middle layers of the star. Thread on a bead at the end.
Geschreven: 22 februari 2017 door admin
Kerstcadeaus
Kerstcadeaus ingepakt in Vivi Gade Design inpakpapier. Gedecoreerd met een halve, gevlochten ster, decoratief lint en strasstenen.
1.
Wrap the box neatly without any visible tape.
2.
Weave one side of a star using wide weaving paper strips.
3.
Pull the weaving paper strip ends from the back of the star down over the sides and onto the bottom of the box and glue in place.
4.
Decorate the weaving paper strips on the box with ribbon.
5.
Decorate with rhinestones.
.jpg )
Geschreven: 22 februari 2017 door admin
Decoratief dienblad
Het dienblad is geverfd met zilverkleurige Plus Color en daarna gedecoreerd met glitter gel. Vivi Gade Design ballen (de Stockholm serie) en plastic ballen zijn als decoratie gebruikt.
1.
Paint the tray with Plus Color silver.
2.
Apply an even layer of Glitter Paste on the inside and outside of the tray’s edge. Assemble Vivi Gade Design paper baubles using the instructions on the back of the package. Decorate the tray with these as well as plastic baubles.
Patroon (276 kB)
.JPG)
.jpg)
.jpg)
.jpg)
.jpg)
