Kaart met een mobiele telefoon

Feestelijke uitnodigingen, menukaarten en servetringen voor de tienerjongen. De toetsen van de mobiele telefoon zijn zelfklevende strasstenen en het geruite papier is Vivi Street Design papier (de London serie).

1.

Cut out paper in various sizes and attach to the card.

2.

Cut out a photo and attach it to the card.

3.

Make a hole for the silver-plated wire.

4.

Cut two pieces of silver-plated wire and bend to form a loop at one end of each piece.

5.

Pull three beads onto each wire.

6.

Feed the wires through the hole in the card.

7.

Bend the wires on the back and attach a small piece of card over the wire ends with E-Z runner.

8.

Attach self-adhesive rhinestones to the card.

9.

Attach a piece of checked ribbon onto the card with double-sided adhesive tape.

10.

Cut two small pieces of checked ribbon and attach them onto the card and finish off with a self-adhesive rhinestone.

11.

Make a small bow tie from the ribbon.

12.

A variation with a napkin ring.

Cut a piece of card and attach a piece of ribbon with double-sided adhesive tape and then the same procedure as before. Tie the ribbon in a bow around a rolled up napkin.

Vivi Gade kegel kabouters

Kegels gedecoreerd met Vivi Gade Design papier. De gezichten zijn gemaakt van Silk Clay en de baard is gelijmd met een lijmpistool. De hoed is geknipt m.b.v. een sjabloon met een pom-pom erop gelijmd.

1.

Cut the paper for the cone and hat using the template.

2.

Glue the paper onto the cone.

3.

Fold over the edge of the hat.

4.

Attach double-sided tape onto the edge.

5.

Glue the hat together.

6.

Put a piece of Silk Clay inside the hat.

7.

Attach the hat onto the cone.

8.

Glue on the beards.

9.

Cut off a small of the tip of the hat and glue on a pom-pom.

10.

Form the face and attach beads for eyes.

Aangehecht bestand Mønsterark (240 kB)

How sweet it is …

De uitnodiging en de decoratie zijn gemaakt van papier en kralen. De kleine hanger is gemaakt van verzilverd draad en past uitstekend bij de kleine jurk.

1.

Cut out the dress, the collar and the petticoat from the template in matching colours.

2.

Assemble the parts with double-sided adhesive tape and 3D foam pads.

3.

Attach a ribbon around the waist of the dress and fasten it on the back. For the bow, cut a piece of ribbon measuring approx. 20cm, tie the bow and attach it to the belt with a 3D foam pad. Trim the ends. Decorate the small collar with self-adhesive rhinestone half-pearls.

4.

Cut a piece of silver-plated wire for the hanger. Double over the wire and twist a couple of times and form it. Bend the ends to form a small loop.

5.

Attach the hanger onto the card. Attach 3D foam pads and attach the hanger with another two 3D foam pads.

6.

Attach the dress to the hanger with 3D foam pads. Use two 3D foam pads on top of each other to achieve the same height as the hanger.

7.

Make a small border and attach it to the card with double-sided adhesive tape.

8.

For the bead coil, cut a piece of wire measuring 20cm. Pull beads onto the wire and twist the wire around a darning needle.

9.

Push a hole through the card and attach the bead coil.

10.

Cut a piece of paper. Attach the paper over the wire ends on the back with double-sided adhesive tape.

11.

Place Cards:

Cut a piece of silver-plated wire measuring 25cm. Twist to form a small loop at the end. Pull seven red and seventy orange beads onto the wire.

12.

Bend the flower head around the silver-plated wire.

13.

Form the petals and close the flower.

14.

Pull a bead onto the end of the silver-plated wire.

15.

Cut a new piece of silver-plated wire and twist it around the stalk.

16.

Form the leaves.

17.

Twist the wire around the leaves.

18.

Pull a bead onto the end of the wire and bend to form a coil.

19.

Bend to form a hook for hanging onto the glass.

20.

Cut a piece of card for the place card which is attached onto the flower stalk with double-sided adhesive tape.

21.

A place card.

22.

A Napkin Ring:

Make a flower following the same procedure as for the place card. Feed a 30cm long piece of wire through the middle of the flower, double over and twist.

23.

Bend the wire to a suitable size. Feed the wire through the middle of the flower.

24.

Twist the wire around the ring.

25.

The finished napkin ring.

Aangehecht bestand Patroon (231 kB)

Kerstdecoratie

Een eenvoudige slinger van gevulde harten van vilt op een lint genaaid.

1.

Paint the wood buttons with Plus Color and let them dry.

2.

Cut out twelve hearts using the template.

3.

Sew the hearts together but leave an opening of 5cm to the heart can be turned inside out. Stuff with polyester stuffing.

4.

Sew the hearts onto the ribbon at the same time as sewing the buttons onto the hearts; all in one process.

Aangehecht bestand Mønsterark (247 kB)

Flower Power broek met riem

Deze uitnodiging is gemaakt van mint groen papier met London design papier en karton. Gedecoreerd met lint en een sieraden gesp. De hanger is van verzilverd draad gemaakt.

1.

Cut out London design paper and attach it onto the card with double-sided adhesive tape.

2.

Attach a narrow piece of London paper in a different pattern onto the card vertically.

3.

Cut narrow strips of light blue card. Attach self-adhesive rhinestones as shown.

4.

Write a text on the small piece of card and attach both pieces onto the card with 1mm 3D foam pads.

5.

Cut out the trousers using the template.

6.

Attach the buckle onto a piece of decorative ribbon and attach it to the trousers.

7.

Twist a piece of silver-plated wire to make a hanger to fit the trousers.

8.

Attach the hanger onto the back of the trousers between two 1mm 3D foam pads. Attach 3D foam pads onto the back of the remaining part of the trousers.

9.

Attach to the card so the hanger hangs on the light blue “rail”.

10.

For the menu card, turn the card with the opening facing down and cut approx. 2cm off one side. Attach paper and card almost the same way as the invitation.

11.

For place cards/glass decoration form a small hanger from silver-plated wire.

12.

Decorate and assemble as shown with a name sign and ribbon.

Aangehecht bestand Patroon (226 kB)