Geschreven: 12 januari 2017 door admin
Maken van de kaart
Plaatskaarten gemaakt van recycled papier. Gedecoreerd met gekleurd karton en een visnet gemaakt van garen en een vis van vilt.
Place cards
Write the text on the computer before cutting out.
Cut recycled card to size 12 x 12cm and fold in the middle.
Make four waves in blue shades; 12 x 4cm – 12 x 3cm – 12 x 2.5cm – 12 x 2cm.
Cut the top edge with a paper edger. Cut the name card in size 8.5 x 4cm and insert it into the waves.
Make a fishing rod from a small piece of bonsai wire, attach a piece of sewing thread and finish with a fishing hook made by bending a ball head pin. Attach a small felt fish to the hook.
Menu card
Cut recycled card to size 15 x 21cm. Fold at 5.25cm and 15.75cm.
Cut the top 4/5 of the doors on both sides.
First decorate the front:
Cut card in various blue and white shades; 5.25 x 4cm – 5.25 x 3.5cm – 5.25 x 3cm.
Cut the top edge with a paper edger and glue on the waves.
Cut a crab with the shape cutter using the template and decorate with water droplets using Gloss Gel.
Glue the crab and ribbons onto one side. Finish by hanging a buoy on the ribbon using a head pin.
Then make the inside of the menu card:
Start by making a life ring from a circle 6cm in diameter and two white strips which you glue on making a cross.
Cut out the menu measuring 9 x 13cm. Cut a curve at the top using the shape cutter and the circle template.
In various blue/white shades cut as follows;
9 x 3.5cm – 9 x 2.5cm – 9 x 2cm – 9 x 1.5cm.
Cut the top edge with a paper edger and glue on these waves.
Cut a ship and a sail and glue it on at one side.
Geschreven: 12 januari 2017 door admin
Koning van de vogels
Verf het masker met A-Color Glass, mix de kleuren en doe een beetje water op de kwast.
2
Knip een kleine driehoek onderin een kegel en maak hier de snavel op het masker van. Verf de snavel en lijm deze op het masker met een lijmpistool.
3
Bevestig met een lijmpistool veren en dons en maak het bijgeleverde elastisch koord vast.
.jpg )
Geschreven: 12 januari 2017 door admin
Kaarten met bloemen
Gemaakt op wit karton met uitgestanste madeliefjes, gebloemd parelmoer papier, zelfklevende strasstenen/halfronde parels en verzilverd draad.
1. Card
Cut a 4cm wide piece of flowery textured pearlescent paper and attach it to the card using double-sided adhesive tape.
2.
Form coils from 0.6cm silver-plated wire as shown.
3.
Attach the wires with double-sided adhesive tape on top as well as underneath.
4.
Attach self-adhesive rhinestone half-pearls.
5.
Use a small vellum paper flower as a template for a flower from pearlescent paper.
6.
Assemble the vellum paper flowers and the one from pearlescent paper with a brad. Push it through the card. Lift the petals.
7.
Use one of the cards to make small signs with text.
8.
Decorate with self-adhesive rhinestone half-pearls and attach the small signs with silver-plated wire.
9. Place Cards/Glass Decorations
Twist the silver-plated wire to form a loop and glue four self-adhesive rhinestone half-pearls together in pairs. Attach flowers around the wire and decorate with a brad.
10.
Cut a strip of party cardboard. Write the guest’s name and assemble/glue around the silver-plated wire with double-sided adhesive tape. Twist the end of the silver-plated wire to form a loop.
11. Menu Cards
For the menu card cut a piece of card measuring approx. 9 x 12.5cm. Print the menu onto party cardboard (in the same cream colour as the card). Decorate with flowers, a brad and small self-adhesive rhinestone half-pearls.
Geschreven: 12 januari 2017 door admin
Kerst decoratie
Handgemaakte papier-mâché cup cakes geverfd met Plus Color en bestrooid met glitter. Gedecoreerd met zelfklevende paper lace borders en met Plus Color in een flesje met een dunne punt.
1.
Paint the cup cakes with Plus Color. Start at the base and let it dry. Then paint the top and sprinkle on glitter.
2.
Attach the self-adhesive paper lace border around the base.
3.
Decorate the cake with Plus Color in a refill bottle with a fine tip.
Geschreven: 12 januari 2017 door admin
Een romantisch huwelijk
Zowel de uitnodiging als de tafeldecoratie zijn gemaakt van hartvormige kaarten en laseruitgesneden karton met organza lint, zelfklevende halfronde strasstenen/parels, satijnen harten en parelmoer karton.
1.
Invitation: draw and cut out the large heart from pearlescent card using the template.
2.
Glue the heart onto the card using double-sided adhesive tape.
3.
Attach the laser cut heart on top using whole and half 3D foam pads.
4.
Attach the satin heart using 3D foam pads.
5.
Decorate the heart with self-adhesive rhinestone half-pearls, which are cut off individually.
6.
Make a hole through the card for the ribbon using hole punch pliers. Attach small satin hearts onto the ribbon.
7.
Menu Card: Cut a piece of pearlescent card measuring approx. 10 x 14.5cm. Write the menu, print it out and glue it onto the menu card.
8.
Cut a laser cut punched out cardboard heart off the lace border.
9.
Attach the heart and a satin heart onto the menu card.
10.
Attach the organza ribbon onto the card using double-sided adhesive tape.
11.
Decorate with self-adhesive rhinestone half-pearls.
12.
Place Cards: Fold and assemble the laser cut box. Insert the organza ribbon through the holes at the top. Put a small gift (a piece of chocolate) into the box before pulling the ribbon and tying a bow.
13.
Cut out the small heart from the template from pearlescent card. Cut a laser cut punched out cardboard heart of the lace border and glue it on top. Then write the guest’s name on the heart.
14.
Table Decoration / Decoration for candle holders: Assemble the laser cut border and decorate with organza ribbon and a small satin heart. Place a small candle holder inside.
Geschreven: 12 januari 2017 door admin
1
Draw the pattern on a piece of paper, and cut it out.
2
Turn the paper over, score along the dotted lines with a firm (not too sharp) stylus and bend.
3
Assemble the bag by adding double sided tape on one side and press the two sides together.
4
Fold the sides in at the bottom and assemble with a piece of double-sided adhesive tape.
5
Cut out a picture from the sheet.
6
Attach the picture onto a piece of patterned paper using double-sided adhesive tape.
7
Attach this onto the bag using double-sided tape.
8
Make a hole for the brad with an eyelet tool and attach the brad.
9
Decorate with rhinestones.
Geschreven: 12 januari 2017 door admin
1
Draw the pattern on a piece of paper, and cut it out.
2
Turn the paper over, score along the dotted lines with a firm (not too sharp) stylus and bend.
3
Assemble the bag by adding double sided tape on one side and press the two sides together.
4
Fold the sides in at the bottom and assemble with a piece of double-sided adhesive tape.
5
Cut out a picture from the sheet.
6
Attach the picture onto a piece of patterned paper using double-sided adhesive tape.
7
Attach this onto the bag using double-sided tape.
8
Make a hole for the brad with an eyelet tool and attach the brad.
9
Decorate with rhinestones.
Geschreven: 12 januari 2017 door admin
Rok en kraag voor bloemenkinderen
Rok: knip cellofaan in stukken van 1.5 m, breng verpakkingstape aan op het midden en vouw dubbel. Rimpel het cellofaan en niet op elastisch koord met een nietmachine. Niet in het met tape beplakte gebied. Lijm de foam cirkels met een lijmpistool.
Kraag: Knip met het sjabloon een bloem van vilt en lijm cirkels van vilt of foam met een lijmpistool.
Hat
Hat
Paint a flat cone with A-Color Glass. Cut petals out in foam rubber, cut notches at the base and glue them onto the inside with foam rubber circles on the outside. Use the glue gun.
Geschreven: 12 januari 2017 door admin
Dankjewel kaart
Een dubbele blanco kaartgedecoreerd met papier, cake servetten en tekst vervolgens verder gedecoreerd met kleine uitgestanste vlinders.
1
Cut a square piece of paper measuring 10.5 x 10.5cm. Attach the paper to the card using double-sided adhesive tape. Also attach a cake napkin and a card circle measuring 6.5cm in diameter.
2
Attach a printed text to the card with 3D foam pads.
3
Attach small punched-out butterflies using Glue Dots.
.jpg )
Geschreven: 12 januari 2017 door admin
Voor buiten
Deze decoratieve windgong is gemaakt van krimpfolievellen gedecoreerd met Groove kleurpotloden en vervolgens in de oven gekrompen. Een mandala kleurboek is gebruikt als sjabloon voor de patronen van de cirkel.
Er is ook een sjabloon voor de bladeren. Het is gemakkelijk om helemaal op te gaan in het inkleuren van de patronen. Kies een glanzend koord uit om de windgong aan op te hangen. Zorg ervoor dat de bladeren elkaar kunnen raken in hun beweging.
1
Put the Mandala design under the transparent shrink plastic sheet. Turn the shiny side down and draw on the rough side. Draw the design with a colouring pencil and fill in. Draw the leaves in the same way using the template and fill in.
2
Cut out the designs. Make holes with revolving punch pliers.
3
Put the design in a preheated oven at 130C for a few minutes. Stay by the oven whilst the design shrinks for approx. 1 minute and take it out of the oven when the design has straightened again.
4
Attach a glossy high-quality polyester cord and add beads for the wind chime’s leaves.
.jpg)
.jpg)
1.jpg)
1.jpg)
1.jpg)
1.jpg)
1.jpg)
.jpg)
.jpg)
.jpg)
