Categorie: | Kerst

12498 Was en zegel

Geschreven: 12 januari 2017 door admin

Decoratie met was

Wasstaven met een lont of in een wassmeltpistool worden gesmolten en het design van de zegels wordt in de was gedrukt. De zegel kan direct op het object worden gemaakt of op vetvrij papier, zodat de afdruk kan worden overgezet.

Tip: read the step-by-step guide before you start.

1.

In order to change the design, unscrew the top part of the seal.

2.

Light the wax stick in the wick and let drip a suitable amount of wax.

3.

Or you may use a sealing wax gun for the wax sticks.

4.

Wait for five to ten seconds until the wax has cooled down. Then push a cooled seal into the warm wax.

5.

Push down the seal for a few seconds and then remove it.

6.

You may make a wax seal on a piece of grease proof paper.

7.

The wax seal can now be removed from the grease proof paper.

8.

You may put a piece of twine into a hole made in the flap on the back of the envelope and “glue” it with wax. Then push the seal into the wax, leaving a print.

Comments are closed.